To install the chimney at an angle of 45 degrees

Morzh tents are usually recommended together with stoves. They usually have 6 segments. As a rule, this is sufficient for good draft and stove efficiency. But if you want to install a standard chimney at an angle, you can purchase this segment.

Our wood-burning stoves are equipped with a spark arrester, but an additional chimney segment reduces the risk of sparks hitting the awning of a mobile sauna, winter tent. The lengthening of the chimney will increase the thermal efficiency of the stove, helping to remove the smoke outside.

Suitable for stoves with a pipe diameter of 90 mm.

Replacing damaged segments

The chimney is easy to assemble even without additional instructions, so it will take you a second. Just install the segments one by one.The additional segment can be stored in a bag along with the stove or inside the firebox.

*Make sure all segments are tightly connected to each other!

Reliable material

Like the stove, the chimney segment is made of AISI 430 stainless steel. The segment has corrosion resistance, does not deform at a temperature of 500°C and above. This steel is an excellent option for a chimney with intermittent operation.

Correct operation

In order for the stove to serve for a long time, regularly clean the chimney from soot. The type of fuel also affects the chimney durability. Use only wood or charcoal for heating. Do not use gas, flammable substances, coal, cardboard, paper.Please note that when the stove is fired up, the pipe may glow red. This is completely normal as the chimney gets hot. The segments are heated to 500°C and higher.

SPECIFICATIONS: